Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 187
The Panel tool uses a complex feature-locating algorithm to find the gap or calculate flushness and
return measurements. The behavior of the algorithm can be adjusted by changing the parameters in the
measurement panel. See "Gap and Flush Algorithm" in the Gocator Measurement Tool Technical Manual
for a detailed explanation of the algorithm.
You must make sure that there are enough data points to define the edge (proper exposure,
etc.). If not, the algorithm will not function.
Measurement Illustration
Gap
Measures the distance between two surfaces. The surface
edges can be curved or sharp.
Measurements
To Next Page
Loading...
