LMI Technologies Gocator Series - Region3 D; Surfacefeature; Surfaceregion2 D; Profilearea

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 301
Region3D
An element of type Region3D defines a rectangular area of interest in 3D.
Element Type Description
X 64f Volume X position (mm).
Y 64f Volume Y position (mm).
Z 64f Volume Z position (mm).
Width 64f Volume width (mm).
Length 64f Volume length (mm).
Height 64f Volumeheight (mm).
Region3D Child Elements
SurfaceFeature
An element of type SurfaceFeature defines the settings for detecting a feature within an area of interest.
Element Type Description
Type 32s Setting to determine how the feature is detected within the area:
0 – Average (formerly Centroid 2d)
1 – Centroid (formerly Centroid 3d)
2 – X Min
3 – X Max
4 – Y Min
5 – Y Max
6 – Z Min
7 – Z Max
8 – Median
RegionEnabled Boolean Setting to enable/disable region:
0 – Disable
1 – Enable
Region
Region3D
Element for feature detection volume.
SurfaceFeature Child Elements
SurfaceRegion2d
An element of type SurfaceRegion2d defines a rectangular area of interest on the X-Y plane.
Element Type Description
X 64f Setting for surface region X position (mm).
Y 64f Setting for surface region Y position (mm).
Width 64f Setting for region width (mm).
Length 64f Setting for region length (mm).
SurfaceRegion2d Child Elements
ProfileArea
A ProfileArea element defines settings for a profile area tool and one or more of its measurements.