LMI Technologies Gocator Series - Page 302

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 302
Element Type Description
Name String Tool name.
Source 32s Profile source.
Anchor\X String (CSV) The X measurements (IDs) used for anchoring.
Anchor\X.options String (CSV) The X measurements (IDs) available for anchoring.
Anchor\Z String (CSV) The Z measurements (IDs) used for anchoring.
Anchor\Z.options String (CSV) The Z measurements (IDs) available for anchoring.
StreamOptions Collection
A collection of StreamOption on page 299 elements.
Stream\Step
32s The stream source step. Possible values are:
1 – Video
2 – Range
3 – Surface
4 – Section
Stream\Id 32u The stream source ID.
Type Boolean
Area to measure:
0 – Object (convex shape above the baseline)
1 – Clearance (concave shape below the baseline)
Type.used Boolean Whether or not field is used.
Baseline Boolean
Baseline type:
0 – X-axis
1 – Line
Baseline.used Boolean Whether or not field is used.
RegionEnabled Boolean If enabled, the defined region is used for measurements.
Otherwise, the full active area is used.
Region
ProfileRegion2d
Measurement region.
Line
ProfileLine
Line definition when Baseline is set to Line.
Measurements\Area Area tool
measurement
Area measurement.
Measurements\CentroidX Area tool
measurement
CentroidX measurement.
Measurements\CentroidZ Area tool
measurement
CentroidZ measurement.
ProfileArea Child Elements
Element Type Description
@id 32s Measurement ID. Optional (measurement disabled if not
set).
Name String Measurement name.
Enabled Boolean
Measurement enable state:
Area Tool Measurement