LMI Technologies Gocator Series - Page 333

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 333
Element Type Description
Anchor\Z.options String (CSV) The Z measurements (IDs) available for anchoring.
StreamOptions Collection
A collection of StreamOption on page 299 elements.
Stream\Step
32s The stream source step. Possible values are:
1 – Video
2 – Range
3 – Surface
4 – Section
Stream\Id 32u The stream source ID.
RegionsEnabled Boolean
Setting to enable/disable regions:
0 – Disable
1 – Enable
RegionCount 32s Count of the regions.
Regions (Collection) Measurement regions. Contains one or two Region
elements of type Region3D.
Measurements\XAngle Plane tool
measurement
XAngle measurement.
Measurements\YAngle Plane tool
measurement
YAngle measurement.
Measurements\ZOffset Plane tool
measurement
ZOffset measurement.
Measurements\StdDev Plane tool
measurement
Standard deviation measurement
Measurements\MinError Plane tool
measurement
Minimum error measurement
Measurements\MaxError Plane tool
measurement
Maximum error measurement
Element Type Description
id (attribute) 32s Measurement ID. Optional (measurement disabled if not
set).
Name String Measurement name.
Enabled Boolean
Measurement enable state:
0 – Disable
1 – Enable
HoldEnabled Boolean
Output hold enable state:
0 – Disable
1 – Enable
SmoothingEnabled Boolean
Smoothing enable state:
Plane Tool Measurement