Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 182
Measurement Illustration
X
Measures the X position of the bottom of a groove.
Z
Measures the Z position of the bottom of a groove.
Parameter Description
Shape Shape of the groove
Location
(Groove X and Groove Z
measurements only)
Specifies the location type to return
Bottom - Groove bottom. For a U-shape and open-shape groove, the X position is at the centroid
of the groove. For a V-shape groove, the X position is at the intersection of lines fitted to the left
and right sides of the groove. See algorithm section below for more details.
Left - Groove's left corner.
Right - Groove's right corner.
Parameters
To Next Page
Loading...
