Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 216
Measurement Illustration
Major
Determines the major axis length of an ellipse fitted to the
part's area in the XY plane.
Minor
Determines the minor axis length of an ellipse fitted to the
part's area in the XY plane.
Ratio
Determines the minor/major axis ratio of an ellipse fitted to
the part's area in the XY plane.
Z Angle
Determines the orientation angle of an ellipse fitted to the
part's area in the XY plane.
Measurements
Parameter Description
Asymmetry Detection
Resolves the orientation of an object over 360 degrees. The
possible values are:
0 – None
1 – Along Major Axis
2 – Along Minor Axis
Decision See Decisions on page 159.
Region See Regions on page 158.
Output See Filters on page 161.
Parameters
To Next Page
Loading...
