LMI Technologies Gocator Series - Page 241

Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 241
Function Description
id - ID of the value
value - Value to store
double Memory_Get64f (int id) Loads a 64-bit double from persistent memory. All persistent memory
values are set to 0 when the sensor starts.
Parameters:
id - ID of the value
Returns:
value - Value stored in persistent memory
int Memory_Exists (int id) Tests for the existence of a value by ID.
Parameters:
id – Value ID
Returns:
0 – value does not exist
1 – value exists
void Memory_Clear (int id) Erases a value associated with an ID.
Parameters:
id – Value ID
void Memory_ClearAll() Erases all values from persistent memory
Function Description
int RuntimeVariable_Count() Returns the number of runtime variables that can be accessed.
Returns:
The count of runtime variables.
int RuntimeVariable_Get32s(int id) Returns the value of the runtime variable at the given index.
Parameters:
Id – ID of the runtime variable
Returns:
Runtime variable value
Runtime Variable Functions
Function Description
long long Stamp_Frame() Gets the frame index of the current frame.
long long Stamp_Time() Gets the time stamp of the current frame.
long long Stamp_Encoder() Gets the encoder position of the current frame.
Stamp Functions