Gocator Line Profile Sensors: User Manual
Gocator Accelerator • 274
An SDK application can interface to the Accelerator application the same way as a physical sensor. For
more information on SDKapplication integration, see SDK Application Integration on the next page.
To accelerate a sensor using the Gocator Accelerator application:
1. Start the sensor you want to accelerate.
2. Launch the Gocator Accelerator application.
3. If a Windows Security alert asks whether you want to allow GoAccelerator.exe to communicate on networks,
make sure Public is checked and then click Allow Access.
4. Click the sensor you want to accelerate in the Sensors list.
If you do not see the sensor, you may need to wait a few seconds and then click the Refresh button ( ).
5. (Optional) Choose an IP in the IP list, or choose Any to let the application choose.
6. (Optional) Change the port in Port.
If port 8080 is already in use, set Port to another port.
7. Click Start.
The sensor is now accelerated.
8. In the Gocator Accelerator application, click the link next to URL to open the accelerated sensor's web
interface.
When a sensor is accelerated, a "rocket"icon appears in the metrics area.
If you restart an accelerated sensor, the sensor will continue to be accelerated when it restarts.
To stop an accelerated sensor in the Gocator Accelerator application:
To Next Page
Loading...
