LMI Technologies Gocator Series - Page 288

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 288
Element Type Description
ns
PatternSequenceType.used
Bool Whether or not this field is used.
PatternSequenceCount 32u Number of frames in the active sequence (read-only).
ExposureMode 32s
Exposure mode:
0 – Single exposure
1 – Multiple exposures
2 – Dynamic exposure
ExposureMode.options 32s (CSV) List of available exposure modes.
Exposure 64f Single exposure (µs).
Exposure.min 64f Minimum exposure (µs).
Exposure.max 64f Maximum exposure (µs).
DynamicExposureMin 64f Dynamic exposure range minimum (µs).
DynamicExposureMax 64f Dynamic exposure range maximum (µs).
ExposureSteps 64f (CSV) Mutiple exposure list (µs).
ExposureSteps.countMin 32u Minimum number of exposure steps.
ExposureSteps.countMax 32u Maximum number of exposure steps.
IntensityStepIndex 32u Index of exposure step to use for intensity when using multiple
exposures.
XSubsampling 32u Subsampling factor in X.
XSubsampling.options 32u (CSV) List of available subsampling factors in X.
ZSubsampling 32u Subsampling factor in Z.
ZSubsampling.options 32u (CSV) List of available subsampling factors in Z.
SpacingInterval 64f Uniform spacing interval (mm).
SpacingInterval.min 64f Minimum spacing interval (mm).
SpacingInterval.max 64f Maximum spacing interval (mm).
SpacingInterval.used Bool Whether or not field is used.
SpacingInterval value 64f Actual value used.
SpacingIntervalType 32s
Spacing interval type:
0 – Maximum resolution
1 – Balanced
2 – Maximum speed
3 – Custom
SpacingIntervalType.used Bool Whether or not field is used.
Tracking Section
See Tracking on the next page.
Material Section
See Material on the next page.
Custom Custom Used by specialized sensors.