LMI Technologies Gocator Series - Page 319

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 319
Element Type Description
Name String Tool name.
Source 32s Profile source.
Anchor\X String (CSV) The X measurements (IDs) used for anchoring.
Anchor\X.options String (CSV) The X measurements (IDs) available for anchoring.
Anchor\Z String (CSV) The Z measurements (IDs) used for anchoring.
Anchor\Z.options String (CSV) The Z measurements (IDs) available for anchoring.
StreamOptions Collection
A collection of StreamOption on page 299 elements.
Stream\Step
32s The stream source step. Possible values are:
1 – Video
2 – Range
3 – Surface
4 – Section
Stream\Id 32u The stream source ID.
BaseType 32s
Setting for the strip type:
0 – None
1 – Flat
LeftEdge Bitmask
Setting for the left edge conditions:
1 – Raising
2 – Falling
4 – Data End
8 – Void
RightEdge Bitmask
Setting for the right edge conditions:
1 – Raising
2 – Falling
4 – Data End
8 – Void
TiltEnabled Boolean
Setting for tilt compensation:
0 – Disabled
1 – Enabled
SupportWidth 64f Support width of edge (mm).
TransitionWidth 64f Transition width of edge (mm).
MinWidth 64f Minimum strip width (mm).
MinHeight 64f Minimum strip height (mm).
MaxVoidWidth 64f Void max (mm).
Region
ProfileRegion2d
Region containing the strip.
ProfileStrip Child Elements