LMI Technologies Gocator Series - Page 322

Gocator Line Profile Sensors: User Manual
Gocator Device Files • 322
Element Type Description
1 – Length
2 – Width
RegionEnabled Boolean Setting to enable/disable region.
Region
Region3D
Measurement region.
Measurements\X Bounding Box tool
measurement
X measurement.
Measurements\Y Bounding Box tool
measurement
Y measurement.
Measurements\Z Bounding Box tool
measurement
Z measurement.
Measurements\Width Bounding Box tool
measurement
Width measurement.
Measurements\Length BoundingBoxMeasure
ment
Length measurement
Measurements\Height Bounding Box tool
measurement
Height measurement.
Measurements\ZAngle Bounding Box tool
measurement
ZAngle measurement.
Measurements\GlobalX Bounding Box tool
measurement
Global X measurement.
Measurements\GlobalY Bounding Box tool
measurement
Global Y measurement.
Measurements\GlobalZAngle Bounding Box tool
measurement
Global Z Angle measurement.
Element Type Description
id (attribute) 32s Measurement ID. Optional (measurement disabled if not
set).
Name String Measurement name.
Enabled Boolean
Measurement enable state:
0 – Disable
1 – Enable
HoldEnabled Boolean
Output hold enable state:
0 – Disable
1 – Enable
SmoothingEnabled Boolean
Smoothing enable state:
0 – Disable
1 – Enable
Bounding Box Tool Measurement