Gocator Line Profile Sensors: User Manual
Gocator Web Interface • 72
Orientation Example
Normal
The sensor operates as an isolated device.
Reverse
The sensor operates as an isolated device,
but in a reverse orientation. You can use this
layout to change the handedness of the
data.
Wide
Sensors are mounted in Left (Main) and
Right (Buddy) positions for a larger
combined field of view. Sensors may be
angled to avoid occlusions.
Reverse
Sensors are mounted in a left-right layout as
with the Wide layout, but the Buddy sensor
is mounted such that it is rotated 180
degrees around the Z axis to prevent
occlusion along the Y axis.
Sensors should be shifted along the Yaxis so
that the laser lines align.
Opposite
Sensors are mounted in Top (Main) and
Bottom (Buddy) positions for a larger
combined measurement range and the
ability to perform Top/Bottom differential
measurements.
Supported Layouts
To Next Page
Loading...
