Malvern Mastersizer 3000 User Manual

Chapter 4 Making measurements
Page 4-52 MAN 0474
Export settings
Choose either rows or columns from the Ordering
selector to present the data horizontally or vertically respec-
tively.
From the Delimiter selection, choose either
Comma separated (csv) or Tab separated. Your choice will
depend on the requirements of the target application.
Use the Formatting option to select either Format
values as displayed in software, which displays numeric
information to a limited number of decimal places (this may
be preferable for presentation purposes); or choose Unfor-
matted values to show all data as recorded by the system.
Select Header on/off to specify whether the
export should contain the names of the fields as a header
row (or column).
Select Overwrite to either replace, or append the
previously exported data.
Parameters

Click the Change selection and order button to show the
Parameter selection window, then select the required
parameters as follows:

Malvern Mastersizer 3000 Specifications

General

Measurement principle	Laser diffraction
Blue laser wavelength	470 nm
Sample dispersion options	Wet and dry dispersion
Data acquisition rate	10 kHz
Particle size range	0.01 to 3500 microns
Laser type	He-Ne and solid state
Accuracy	Better than 1%
Repeatability	Better than 0.5%
Technology	Mie and Fraunhofer theories
Sample dispersion units	Hydro MV, Hydro LV, Aero S
Optical model	Mie theory
Power requirements	100-240 V, 50/60 Hz
Detector arrangement	Log-spaced array