Driving
5.2 Operating the transmission
5 - 34 3 112 993 en Operating manual GMK 6400
12.07.2013
Switching off • Release the accelerator.
• Stop the truck crane just in case.
• Wait until the engine runs at idle speed.
• Shift to position N.
• Shift to position D or R for the required direction
– When the truck crane is stationary, the corresponding starting gear will
be engaged,
– If the truck crane is still moving, a gear appropriate to the speed will be
engaged.
The newly selected gear will be shown in the display.
The transmission mode DM or RM is switched off, and:
– The transmission shifts automatically,
– Manual gear change is possible.
Limiting
maximum speed
For especially sensitive manoeuvring, you can restrict the top speed in the
DM and RM transmission modes.
• If necessary, open the main menu ö and press the (1) button once.
This opens the
Settings submenu.
To Next Page
Loading...
