Driving
5.2 Operating the transmission
Operating manual GMK 6400 3 112 993 en 5 - 35
12.07.2013
• Press the (3) button once.
A red bar (2) appears below the display (1).
• Set the required top speed with the switch
(4).
While making the setting, you can read the
value setting from the display (1) (0 to 100%).
The speed setting is only reached when you
press the accelerator down fully.
You can cancel the entry at any time using the (1) button. The settings are
then reset.
• Apply the top speed entered – press the button (2) once.
The red bar below the display disappears.
To Next Page
Loading...
