Driving
5.6 Heating and air-conditioning system
Operating manual GMK 6400 3 112 993 en 5 - 79
12.07.2013
Saving the
automatic heating
start
Heating is started automatically on schedule only if the time and the day of
the week have been correctly set;
à p. 5 - 78.
You can set three different automatic heating starts – up to seven days in
advance.
H
If you call up values in order to change them during the following setting
process, they flash for 5 seconds. The entry must be made within this
period. The value stops flashing after 5 seconds and is saved as the new
value.
• To retrieve a storage location, press the button (1) once.
Flashing displays:
– The retrieved storage location, e.g. 2,
– The last saved heating start, e.g. 6.00.
s t
• Set the time for the desired heating start, e.g. 8.00
Wait for approx. 5 seconds until the day of the week for the heating start
flashes, e.g. MO for Monday.
s t
• Set the day of the week for the desired heating start.
Wait for approx. 5 seconds until the current time is shown, e.g. 14.00 hrs.
The new heating start has now been saved and switched on.
H
If you wish to store one or two more heating starts, retrieve a new storage
location using the
u button and repeat the procedure.
After you have saved the heating start, you can also set the heating period;
à Setting the heating period, p. 5 - 80.
s
To Next Page
Loading...
Need help?
General
