Operating elements for crane operation
9.2 Short description of the operating elements
9 - 86 3 112 993 en Operating manual GMK 6400
12.07.2013
Teleautomation direction display
Teleautomation on display/Manual telescoping on
Anemometer display
Same as in main menu;
à p. 9 - 75.
In the Settings
submenu
Telescoping emergency programme access
The right dead man's switch is pressed.
1On: Start teleautomation with
Extending
2On: Start teleautomation with
Retracting
Flashing = control lever movement incorrect
à p. 11 - 91
1 Teleautomation on
à Telescoping with teleautomation, p. 11 - 91
2 Manual telescoping on
à Manual telescoping, p. 11 - 79
– Press the button 1 x: After entering the keycode, the Telescoping
emergency programme opens
à p. 14 - 43
To Next Page
Loading...
