Operating elements for crane operation
9.2 Short description of the operating elements
Operating manual GMK 6400 3 112 993 en 9 - 93
12.07.2013
Entering values
The input mode for the RCL code is switched on.
RCL display
– After a standstill of up to 48 hours
Ignition on –
Monitoring submenu opens; à p. 11 - 21
– After a standstill of more than 48 hours
Ignition on –
Enter rigging mode submenu opens; à p. 11 - 22
Main menu
Date/time display
à Entering the time/date, p. 11 - 51
Serial number and programme version displays
s
– To the right: Next greater value
– To the left: Next smaller value
Slowly turning – changes the value gradually
Quickly turning – changes the value quickly
à p. 11 - 28
1 Time
2 Date
1 Truck crane serial number
2 RCL programme version – always state in the event of a malfunction;
à p. 14 - 22
To Next Page
Loading...
