CSP−900RMM−2 MD Helicopters, Inc.
Rotorcraft Maintenance Manual
Page 206
Revision 34
05-20-50
Table 201. Routine Inspection (Cont.)
Registration No. Serial No. Helicopter Total Hours
Model InitialRMM SectionRequirement
Left Transmission and Deck Area (Cont.)
If optional rotor brake system is installed:
900 Examine the rotor brake:
Head for leaks and correct installation
Disc for wear, scratches, gouges, distortion and correct installation
Carrier and lining (pad) for indication of too much lining wear,
warping, and pitting
Control valve for leaks and correct installation.
63−22−00
Landing Gear
900 Inspect the landing gear for correct installation and condition. 32−00−00
900 Inspect the landing gear dampers for correct servicing. 12−00−00
Touch−up all damaged paint as necessary.
Airframe Segmented Inspection Program Routine Inspection Certification
I certify that this aircraft has been inspected in accordance with the Airframe Segmented Inspection Program
Routine Inspection inspection requirements and is determined to be in an airworthy condition.
Signature
Rating Type or Certification No.
Date
To Next Page