MD Helicopters MD Explorer - Closeout Panels; Closeout Panels Installation; Closeout Panels Removal; Door Panel and Trapping Strip

CSP−900RMM−2MD Helicopters, Inc.
Rotorcraft Maintenance Manual
Page 409
Original
25-20-00
B. Light Support Plate Installation
(1). Prepare surface for electrical bond (Ref.
CSP-SPM).
(2). Install screws (4) and washers (5)
securing light support plate (12) to
support brackets.
(3). Install screws (9 and 10) securing area
light (11) to light support plate (12).
(4). Install roof panel (7) (Ref. Section
25-20-00).
22. Closeout Panels
A. Closeout Panels Removal
(Ref. Figure 404)
(1). Remove roof panel (7) (Ref. Section
25-20-00).
(2). Remove light support plate (12) (Ref.
Section 25-20-00).
(3). Remove screws (4) and washers (5) that
attach closeout panels (8) to roof
support structure.
B. Closeout Panels Installation
(1). Install screws (4) and washers (5)
attaching closeout panels (8) to roof
support structure.
(2). Install light support plate (12) (Ref.
Section 25-20-00).
(3). Install roof panel (7) (Ref. Section
25-20-00).
23. Door Panel and Trapping Strip
A. Door Panel and Trapping Strip Removal
(Ref. Figure 404)
(1). Remove screws (4) that attach trapping
strip (16) to door frame (18).
(2). Remove screws (14) and washers (15)
that attach lower door panel (17) to
door frame (18).
(3). Remove door panel (17) and trapping
strip (16).
B. Door Panel and Trapping Strip
Installation
(1). Install screws (14) and washers (15)
attaching lower door panel (17) to door
frame (18).
(2). Install screws (4) attaching trapping
strip (16) to door frame (18).