CSP−900RMM−2MD Helicopters, Inc.
Rotorcraft Maintenance Manual
Page 201
Revision 36
05-10-00
CONTINUED AIRWORTHINESS COMPONENT OVERHAUL
MAINTENANCE PRACTICES
1. General
This section contains the assembly and
component overhaul requirements. The listed
assemblies or components should be removed
from the helicopter and overhauled at the
intervals specified.
Neither the assignment of an overhaul life to
an assembly or component nor failure to
assign a life constitutes a guarantee of any
kind. The only guarantees are those included
in the warranty applicable to the helicopter
and any assembly or component warranty that
is included in the Purchase Agreement for the
helicopter the assembly or component.
2. Overhaul Schedule
Table 201 tabulates the overhaul require
ments for components and assemblies with
finite overhaul lives.
The first column (Model) of the schedule
shows which model of helicopter the
component overhaul schedule is applicable.
The second column (Component / Assembly)
is a brief description of the assembly or
component.
The third column (Part Number) is the
applicable assembly or component part
number.
The fourth column (Hours) is the applicable
serviceable life before overhaul.
The fifth column (RMM Section) is the
applicable section of the RMM that has the
procedure and requirements for overhaul of
the assembly or component. In some
instances in which there is no applicable
RMM section, reference to other documenta
tion or a note will appear.
To Next Page
Loading...
