CSP−900RMM−2 MD Helicopters, Inc.
Rotorcraft Maintenance Manual
Page 208
Revision 19
25-60-10
(2). Remove clamps (4) and guard (1).
G. Float Guard Removal
(Ref. Figure 4).
NOTE: This installation is only done when the
aircraft is configured with both Rescue
Hoist and Air Cruiser Emergency Floats to
gether.
(1). Remove tie wraps as required and
remove straps (6).
(2). Position and secure mating surfaces of
Velcro (hook) (4) on cover (2) to velcro
(pile) (5) area on float bag (2).
To Next Page
Loading...
