CSP−900RMM−2 MD Helicopters, Inc.
Rotorcraft Maintenance Manual
Page 220
Revision 35
05-20-50
Table 205. Inspection 4 − Landing Gear (Cont.)
Registration No. Serial No. Helicopter Total Hours
Model InitialRMM SectionRequirement
Landing Gear (Cont.)
900 Inspect dampers for leaks, condition, and security of attachment
hardware.
32−00−00
12−00−00
900 Make sure forward and aft cross tube spread is in permitted limits 32−00−00
900 Do a visual inspection of the sealing compound for the jumper
connections, crosstubes, fuselage fittings, saddles, and stop−clamps
for condition and cracks.
32−00−00
Touch−up all damaged paint as necessary.
Airframe Segmented Inspection Program Inspection 4 Certification
I certify that this aircraft has been inspected in accordance with the Airframe Segmented Inspection Program
Inspection 4 inspection requirements and is determined to be in an airworthy condition.
Signature
Rating Type or Certification No.
Date
To Next Page
Loading...
