CSP−900RMM−2 MD Helicopters, Inc.
Rotorcraft Maintenance Manual
Page 230
Revision 34
05-20-50
Table 208. Inspection 7 − Tail (Area 7) (Cont.)
Registration No. Serial No. Helicopter Total Hours
Model InitialRMM SectionRequirement
Anti−Torque/Directional Flight Controls
900 Examine VSCS actuators, mounting brackets, control rods, and
endplate cranks for condition, indication of interference, correct
installation, and that rod end bolts are installed in the correct
direction.
67−20−00
900 Examine the thruster and thruster components:
Do a check for correct thruster cable tension with a tensiometer
67−20−00
Electrical Power
900 Examine area electrical wiring and electrical component installation
for condition, support, and correct installation.
98−00−00
Touch−up all damaged paint as necessary.
Airframe Segmented Inspection Program Inspection 7 Certification
I certify that this aircraft has been inspected in accordance with the Airframe Segmented Inspection Program
Inspection 7 inspection requirements and is determined to be in an airworthy condition.
Signature
Rating Type or Certification No.
Date
To Next Page
Loading...
