CSP−900RMM−2MD Helicopters, Inc.
ROTORCRAFT MAINTENANCE MANUAL
Page 3
Revision 35
05-20-00
quotation marks (for example, “Flexbeam
Inspections”) refer to specified inspections to
be done as shown in the applicable RMM
section.
The third column shows the applicable
RMM section, and/or the SPM and its
applicable section(s).
The fourth column is for verification of the
performance of the specified inspection.
All completed inspection schedules must be
kept as a permanent part of the helicopter
records.
9G05-002
1. NOSE SECTION AND COCKPIT
2. CABIN COMPARTMENT
3. UPPER TRANSMISSION DECK
4. MAIN ROTOR
5. POWERPLANT
6. BAGGAGE COMPARTMENT
7. TAILBOOM AND EMPENNAGE
Figure 1. Inspection Areas
To Next Page
Loading...
