MCS301 - 3ph meter Page 11 of 142
MCS301 meter - product Manual 1.25 MetCom Solutions GmbH
1.3 Meter standards
The MCS301 meter is tested and approved according below standards:
• IEC standards
o EN62052-11 basic standard for electronic meters
o EN62053-21 active energy meters, class 1 and 2
o EN62053-22 active energy meters, class 0,5 and 0,2
o EN62053-23 reactive energy meters, class 2 and 3
o EN62053-24 reactive energy meters, class 0,5 and 1
o EN62056-xx DLMS communication protocol
o EN62056-21 IEC communication protocol
o EN62056-53 COSEM application layer
o EN62056-62 interface classes
o EN62056-61 OBIS identifier system
• MID standards
o EN50470-1 basic standard for electronic meters
o EN50470-3 electronic meters, class A, B, or C
1.4 Meter approvals
The following approvals are available for the MCS301 meter
NMI MID approval, See T11028.pdf
Conformity to relevant IEC standard
To Next Page
Loading...