Metcom Solutions MCS301 - Time Synchronization Using NTP

27 GPRS support Page 127 of 142
MCS301 meter - product Manual 1.25 MetCom Solutions GmbH
27.2.5 Push targets
Up to 5 different push targets can be selected using different lists of push parameters
• Push target - TCP
TCP server settings
- Server
- Port number
• Push target - UDP
UDP server settings
- Server
- Port number
• Push target - SMS
SMS server settings
- Phone number
• Push target - E-Mail
Email settings
- Recipient
- sender
- subject
SMTP server settings
- Server
- Port number
- User name
- Password
- Mode
• Push target – FTP
FTP file
- File name
FTP server settings
- Server
- Port
- User name
- Password
- Timeouts
- Mode
27.3 Time synchronization using NTP
In combination with the COM200 module the time&date of the meter can be synchronized using
a NTP server. Below setting are needed:
Time and date of the meter are synchronized after every reset, which occurs after power-up or
at a specific (configurable) date of the day