Metcom Solutions MCS301 User Manual

MCS301 - 3ph meter Page 8 of 142
MCS301 meter - product Manual 1.25 MetCom Solutions GmbH
1 Overview
The MCS301 meter is available in different variants for direct and CT and CT/VT connection.
The meter conforms to the relevant specifications of the DIN, MID and IEC standards. The
meter is prepared for AMI application by using communication modules plugged under the
terminal cover of the meter. Below variants are supported:
• 3ph meter, CT and CT/VT connected with dedicated power supply
• 3ph meter, CT/VT connected with wide range power supply
• 3ph meter, DC connected
This manual describes the feature set of the different FW versions of the MCS301, which is
displayed on the LCD as well as readout through any interface using below OBIS codes:
OBIS code
CT & CT/VT
meter
DC meter
MCOR FW identification 1-0:0.2.0 01.01.14
MCOR FW signature 1-0:0.2.8 A257F480
MCOR FW identification 1-0:0.2.0 01.01.20 03.01.20
MCOR FW signature 1-0:0.2.8 9D6F9ECA 3798EED1
MCOR FW identification 1-0:0.2.0 01.01.21 03.01.21
MCOR FW signature 1-0:0.2.8 0EFA195B 49FD765D
MCOR FW identification 1-0:0.2.0 01.01.23 03.01.23
MCOR FW signature 1-0:0.2.8 E79AF67A BDBE62F8
MCOR FW identification 1-0:0.2.0 01.01.24 03.01.24
MCOR FW signature 1-0:0.2.8 C820532A 4413E7C1
MCOR FW identification 1-0:0.2.0 01.01.25 01.01.25
MCOR FW signature 1-0:0.2.8 781FD97C 781FD97C

Metcom Solutions MCS301 Specifications

General

Brand	Metcom Solutions
Model	MCS301
Category	Measuring Instruments
Language	English