30 Reading and Configuration Tool Page 131 of 142
MCS301 meter - product Manual 1.25 MetCom Solutions GmbH
30 Reading and Configuration Tool
The MCS301 meter can be read out, set and parameterized via the optical and/or electrical
(RS485) interface, in accordance with the DLMS/COSEM protocol.
For this purpose, you need the Blue
2
Link readout and setting tool, which can be used to alter
and read out the meter's register and all setting parameters.
Blue
2
Link supports the following functionality:
Readout parameters
• All register data
• All PQ data (instantaneous, 10min interval, …)
• Power outage data
• All log file Log file data
• All Load profile data
• All connected M-Bus data
• Communication module status
• Meter status
• Complete meter configuration
Change of meter parameters
• Identification and passwords
• TOU parameters
• Baud rates
• Parameter of display list
• Pulse constants, CT/VT ratio
• Input / output configuration
• All Load profile parameters
• All log file parameters
• M-Bus parameter
• Communication module parameter (GPRS)
• Push mode parameters
Actions
• Set time and date
• Reset all counters
• Reset log file parameters
• Reset load profile of billing data
• Reset register data
• FW download of the meter application
• FW download of the GPRS module
All parameters can be readout or changed remotely by using transparent GSM/GPRS or
Ethernet modules too.
To Next Page