Metcom Solutions MCS301 - Application Relevant FW Part; Metrological Relevant FW Part

MCS301 - 3ph meter Page 16 of 142
MCS301 meter - product Manual 1.25 MetCom Solutions GmbH
4.1 Application relevant FW part
The application part of the FW supports below HW and FW functionality
• Optical interface
• RS485 and/or RS232 interface
• Communication module interface or Ethernet interface
• Wired M-Bus interface
• 2 control inputs or 2 pulse inputs
• 1 mechanical relay outputs (up to 10A)
• display control of non MID relevant data
• load profile
• historical data
• log file
• PQ profile
• Customer interface acc. DSMR 5.0
• tariffication of energy and demand register
• FW download of the application relevant part
4.2 Metrological relevant FW part
The metrological part of the FW supports below HW+FW functionality
• Measurement / metrology part
• Flash memory
• HW jumper to secure specific register data
• display control of MID relevant data
• Internal supercap and battery support
• Demand reset button
• Alternate button
• tamper detection (terminal & main cover opening, magnet detection, …)
• 2 metrological LED’s
• 6x 230V, 100mA outputs