Metcom Solutions MCS301 User Manual

MCS301 - 3ph meter Page 77 of 142
MCS301 meter - product Manual 1.25 MetCom Solutions GmbH
15.3 Log file 3 – Disconnector Control Log
Size of the Disconnector Control Log: 680 entries (rolling storage)
Below events are recorded with time and date stamp in the Disconnector Control Log
No Name Description
59
Disconnector ready for manual
reconnection
Indicates that the disconnector has been set into the
Ready_for_reconnection state and can be manually reconnected
60
Manual disconnection
Indicates that the disconnector has been manually disc
onnected.
61 Manual connection Indicates that the disconnector has been manually connected.
62 Remote disconnection Indicates that the disconnector has been remotely disconnected.
63 Remote connection
Indicates that the disconnector has been remotely co
nnected.
64
Local disconnection
Indicates that the disconnector has been locally disconnected
(i.e. via the limiter or current supervision monitors).
65
Limiter threshold exceeded
Indicates that the limiter threshold has been exceeded.
66
Limiter thres
hold ok
Indicates that the monitored value of the limiter dropped below
the threshold.
67
Limiter threshold changed
Indicates that the limiter threshold has been changed
68
Disconnect/Reconnect failure
Indicates that the a failure of disconnection or rec
onnection has
happened (control state does not match output state)
69
Local reconnection
Indicates that the disconnector has been locally re
-
connected
(i.e. via the limiter or current supervision monitors).
70
Supervision monitor 1 threshold exceeded
Ind
icates that the supervision monitor threshold has been
exceeded.
71
Supervision monitor 1 threshold ok
Indicates that the monitored value dropped below the threshold.
72
Supervision monitor 2 threshold exceeded
Indicates that the supervision monitor thr
eshold has been
exceeded.
73
Supervision monitor 2 threshold ok
Indicates that the monitored value dropped below the threshold.
74
Supervision monitor 3 threshold exceeded
Indicates that the supervision monitor threshold has been
exceeded.
75
Supervis
ion monitor 3 threshold ok
Indicates that the monitored value dropped below the threshold.
255
Event log cleared
E
vent log was cleared. This is always the first entry in
the effected
event log.
Table 38: Definition of log file 3 – Disconnector Control Log

Metcom Solutions MCS301 Specifications

General

Brand	Metcom Solutions
Model	MCS301
Category	Measuring Instruments
Language	English