IV
4. Do not make changes or modifications to the software or hardware of this system.
5. In no event shall Mindray be liable for problems, damage, or loss caused by
relocation, modification, or repair performed by personnel other than those
designated by Mindray.
6. The purpose of this system is to provide physicians with data for clinical diagnosis. It
is the physician’s responsibility for diagnostic procedures. Mindray shall not be liable
for the results of diagnostic procedures.
7. Important data must be backed up on external memory media.
8. Mindray shall not be liable for loss of data stored in the memory of this system caused
by operator error or accidents.
9. This manual contains warnings regarding foreseeable potential dangers, but you shall
always be alert to dangers other than those indicated as well. Mindray shall not be
liable for damage or loss that results from negligence or from ignoring the precautions
and operating instructions described in this operator’s manual.
10. If the manager for this system is changed, be sure to hand over this operator’s
manual to the new manager.
About This Manual
This operator’s manual describes the operating procedures for this diagnostic ultrasound
system M7/M7T and the compatible probes. To ensure safe and correct operations,
carefully read and understand the manual before operating the system.
Notation Conventions
In this operator’s manual, the following words are used besides the safety precautions
(refer to "Safety Precautions"). Please read this operator’s manual before using the
system.
CAUTION:
The diagnostic ultrasound system is not intended for
ophthalmic use. Its use in this clinical specialty is
contraindicated.
Operator’s Manuals
Please read the operator’s manuals carefully before operating the system.
The operator’s manuals consist of manuals for the main unit and transducers. The English
manuals are provided on paper; however, the manuals, which are translated into
languages other than English, are provided in CD (Compact Disc).
The content of the operator manual, such as screens, menus or descriptions, may be
different from what you see in your system. The content varies depending upon the
software version, options and configuration of the system.
To Next Page
Loading...
