Mindray M7T - Add; Delete a User

Patient Data Management 11-19
 For emergency users, click [Emergency] directly to log on.
 To change user:
(1) To log out the current user and change to another user, click
at the lower
right corner of the screen to pop up the following dialogue box:
(2) Click [Change User] to pop up the Login dialogue box.
(3) Enter the user name and password in the field box.
11.9.4 Add/ Delete a User
The system administrator can add and delete a user, while the operator can’t.
Add a User
Premise: you must log on the system as the system administrator. If not, you will be
required to enter administrator name and password before the setting.
1. Open the “Admin” page through the path: [Setup]→[System Preset]→[Admin]. See
the figure below.