Mindray M7T - Quickly Saving Images to USB Flash Drive; Quickly Saving Full Screen Image to the System; Thumbnails

11-4 Patient Data Management
appear in the thumbnail area on the right side of the screen. When you move the
cursor onto the thumbnail, its filename with suffix will be displayed.
 When a dialog box is displayed on the current screen, press the shortcut key to
save the screen in the BMP format.
 To save cineloop image in the system:
Freeze an image and click [Save Cine] in the soft menu to save the current cine file in
the default file directory in the dynamic image format CIN.
The thumbnail of this image will appear in the thumbnail area on the right side of the
screen. When you move the cursor onto the thumbnail, its filename with suffix will be
displayed.
11.2.5 Quickly Saving Images to USB Flash Drive
Use user-defined keys to quickly save the single-frame or cine to USB flash drive.
The image file is stored in the directory: U disk\ US Export\ patient folder\ exam folder\
Image ID.bmp, where,
 Patient folder name: patient name + patient ID
 Exam folder name: exam mode+ exam time
 To store single-frame image to USB flash drive:
(1) Set the user-defined key through the path: [Setup] → [System Preset] → [Key
Config].
Select a key in the Key Function page on the left side and select “Send image to
USB disk” in the Output page of Function field on the right side.
(2) Press the user-defined key to save the image to the USB flash drive.
 To store cine to USB flash drive
Save cine images to a USB flash drive in the AVI format.
(1) Set the user-defined key through the path: [Setup] → [System Preset] → [Key
Config].
Select a key in the Key Function page on the left side and select “Send AVI Cine
to USB disk” in the Output page of Function field on the right side.
(2) Press the user-defined key to save the cineloop.
11.2.6 Quickly Saving Full Screen Image to the
System
This function can save the current full screen image to the system with the image in
real-time status.
Set the user-defined key through the path: [Setup] → [System] → [Key Config]. Select a
key in the Key Function on the left side and select “Save Full Screen Image to hard drive”
in the Output page of Function field on the right side.
After the setting, you can use the user-defined key to save full screen image to the
system.
11.2.7 Thumbnails
The stored images or cineloops are displayed in the form of thumbnails on the screen: