Mindray M7T - Region-Specific Settings; General System Settings

Setup 15-3
Page Description
Biopsy
To set the needle-guided bracket model and biopsy guide line relevant
parameters.
Option
Displays the installation of system supported options. You can install or
uninstall the options through the page.
Admin To set the user account control relevant information.
15.1.1 Region
Open the Region page via “[Setup] → [General] → [Region]”.
Items Description
Hospital
Information
To set the hospital relevant information like name, address, telephone and
so on.
Language
To select a language for the system, the available languages are Chinese,
English, French, German, Italian, Portuguese, Russian, Spanish, Polish,
Czech, Turkish, Finnish, Danish, Icelandic, Norwegian, and Swedish.
The system will restart automatically after you change the language.
Time Zone To select the time zone.
Time Format To select the time format between 12 Hour and 24 Hour.
Date Format
To set the date format among DD/MM/YYYY, MM/DD/YYYY and
YYYY/MM/DD.
System Date
To set the system date.
Posit the cursor into the corresponding field, and enter the data through
the keyboard; or, click the calendar icon , and then select the date.
System Time
Move the cursor onto the corresponding field, enter the time manually
through the keyboard; or, move the cursor onto the time segment and
press <Set>, then increase or decrease the certain value by rotating the
multifunctional knob or clicking the icons at the right side.
15.1.2 General
Open the General page via “[Setup] → [System Preset] → [General]”, items are
introduced as follows:
Region Items Description
Patient Info
Info displays in
image banner
To select if to display the following patient
information on the image banner: Gender, Age,
Operator, ID, Name, Hospital, and DOB.
H&W Unit To set the unit for patient height and weight.
Surface Formula To set the surface formula.
Exam Setup
Status after exam
ends
To set the system status when exam ends among
Scan, Register, Worklist.