6-4 Stress Echo
1. Toggle Play.
2. Frame-by-frame loop review or direct access to first/last loop in series.
3. Decrease Speed/Increase Speed: Decrease or increase playback speed.
4. Sweeping Play: Continuous sweeping playback of loops
forward-backward-forward.
5. Labels on/off: hide/display graphics on loops.
Specifies loop segment of display.
Bookmark Review: turns on/off the bookmark function.
Scroll Up: Displays loops in previous view.
Scroll Down: Displays loops in next view.
Quad/Single: to display all loops of the exam.
Home: Selects first loop in currently displayed view.
To Left: Selects previous loop in currently displayed view.
To Right: Selects the next loop in currently displayed view.
End: Selects last loop in currently displayed view.
Tips:
1. For a Continuous stage, Scroll Up and Scroll Down buttons display the
preferred loop for the view. If no loop is designated as preferred for the selected view,
these buttons will have no effect.
2. For a Continuous stage, the Home, To Left, To Right and End buttons display loops
saved for the stage (not view).
6.4 Selecting Preferred Stress Echo
Loops (Select Mode)
The selected clips are used for analysis in the review mode and wall motion scoring mode.
Select Mode is used for the selection of the best loops of the examination.
When acquisition is ended, select mode is enabled automatically, or, select the Select
Mode toolbar button at the left corner of the screen.
1
2
3
4
5
1
2
4
7
8
To Next Page
Loading...
