Mindray M7T - Moving Comments; Modifying (Editing) Comments; Deleting Comments

10-4 Comments and Body Marks
 Press <Clear> to clear the trace(s).
4. Press <Set> to finish a tracing.
5. Click <Trace> again to exit the status.
10.1.4 Moving Comments
1. Move the cursor onto the comment that needs to be moved. Press <Set> to select it,
and a highlighted box appears around the comment.
2. Roll the trackball to move the comment to the new position.
3. Press the <Set> key to anchor the comment in the new position, and the
comment-moving operation is complete.
10.1.5 Modifying (Editing) Comments
 Modifying (Editing) characters
1. In the comment status, move the cursor onto the comment that needs to be modified:
 Directly enter the character at the position that the cursor stays; or,
 Double press the <Set> key to enter the edit status, use the or key
to move the cursor to a location where needs to insert characters, and type
characters.
2. Press the <Del> key to delete the comment character or text on the right side of the
cursor; Press the <Backspace> key to delete the comment character or text on the left
side of the cursor.
3. Roll the trackball or press the <Set> key or the multifunctional knob to confirm the
modification and to exit the edit status, and the color of the comments turns yellow.
 Modifying (Editing) Arrows
1. Move the cursor on the arrow that needs to be modified. After the cursor turns to ,
press the <Set> key. The color of the current arrow turns green, and there is green
frame around the arrow, indicating the arrow can be edited. Move the cursor to
change the arrow position.
2. Rotate the multifunctional knob to modify the arrow direction.
3. Press the <Set> key or the <Enter> key to complete the operation.
10.1.6 Deleting Comments
 Deleting Comment Characters, Texts or Arrows
1. Move the cursor to the comment to be deleted.
2. Press the <Set> key to select the comment.
3. Press the <Del> or <Back> key to complete the deleting operation.
 Deleting a recently-added character, text or arrow
After you add several comments and the cursor is in the “|” or “ ” status, pressing
<Clear> can delete the recently-added or recently-edited comment.
 Delete word
Click <Delete Word> to delete the word in the reserved order. You can also assign the
user-defined key for the function in “[Setup] → [System Preset] →[Key Config]”.