System Overview 2-13
No. Name Function
11. Display support arm
Supports the display module, for adjusting
the height and position of the display
module.
12. I/O extend module To extend I/O ports
13. Probe port To connect probe or probe extend module.
14. Adjustable telescopic column To adjust height of the operating platform
15. Probe extend module To extend ports for connecting probes
16. Power adapter /
17. Power module
Power supply input/output interface,
equipotential terminal, breaker and power
indicator
Power Panel
No.
Name Function
1. Circuit breaker Switch on or off the mains power supply
2. Power inlet AC power inlet
3. Power indicator
Indicates if the trolley is connected to the mains power supply:
If connected with mains power and the breaker is on, the
indicator illuminates in green color
If not connected with mains power or the breaker is off, the
indicator does not illuminate
4. Power outlet Supply power for optional peripheral devices (e.g. DVR)
5
Equipotential
terminal
Used for equipotential connection, to balance the protective
earth potentials between the system and other electrical
equipment
2.8 Extend Modules
There are four extend modules available for the system:
Probe extend module
I/O extend module
V/A extend module
To Next Page
Loading...
