Display & Cine Review 7-9
Change speed in M/D mode, or change the scale in PW mode.
2D image cleared/
Unfreeze the image: after the image is unfrozen, images stored in the cine
memory will be cleared, but if the cine memory is split, only the currently cine
memory corresponding to the activated window will be cleared.
Open/ close the image file that occupies cine memory.
7.7 Cine Settings
You can set the cine length via “[Setup] → [System Preset] → [General]”. The items are
shown as follows:
Non-live storage
For Time without ECG(s), 1~60s.
For Time (with ECG Loop): the unit is Beat, 1~16.
Live capture
Type: Retrospective, Prospective.
Cine length.
To Next Page
Loading...
