Barcode Reader C-13
The digital imager reader can also read a barcode presented within the aiming pattern
but not centered. The top examples in show acceptable aiming options, while the
bottom examples cannot be decoded.
C.2.5 Scanning in Hands-Free Mode
The optional Intellistand adds greater flexibility to scanning operation. When the digital
imager reader is seated in the stand’s “cup,” the digital imager reader’s built-in sensor
places the digital imager reader in hands-free mode. When the digital imager reader is
removed from the stand it operates in its normal hand-held mode.
Use the Intellistand’s adjustment knobs to adjust the height and angle of the
digital imager reader.
1.
Reader holder (cup)
2.
Angle adjustment knob
3.
Height adjustment knob
To Next Page
Loading...
Need help?
General
