MIR 250 Hook - General Safety Precautions

4. Safety
MiR250 Hook User Guide (en) 01/2023 - v.1.2 ©Copyright 2021-2023: Mobile Industrial Robots A/S. 41
4.2 General safety precautions
This section contains general safety precautions.
CAUTION
Harmful electromagnetic interference might be the result of having two radio
modules transmitting at the same time. The robot is certified to have only one radio
module active at any given time.
• Do not attach an access point or additional radio modules to the robot while it is
connected to a wireless network.
WARNING
If the robot is not running the correct software and is therefore not functioning
properly, the robot may collide with personnel or equipment causing injury or
damage.
• Ensure that the robot is always running the correct software.
WARNING
When the robot is in an operating hazard zone, there is a risk of injury to any
personnel within the zone.
• Ensure that all personnel are instructed to stay clear of operating hazard zones
when the robot is in the zone—see "Using operating hazard zones" on page177.
WARNING
The robot may drive over the feet of personnel, causing injury.
• All personnel must be informed of the side Protective fields of the robot and be
instructed to wear safety shoes near an operating robot—see "Personnel
detection" on page123.