MIR 250 Hook - External Parts

2. Product presentation
MiR250 Hook User Guide (en) 01/2023 - v.1.2 ©Copyright 2021-2023: Mobile Industrial Robots A/S. 15
2.2 External parts
This section presents the parts of MiR250 Hook that are visible on the outside.
Figure 2.1 MiR250 Hook external parts.
Pos. Description Pos. Description
1 Hook center cover 2 Corner bumper: four pcs,
one on each corner
3 Front cover: opens to
front compartment—
see "Internal parts" on
page23
4 Caster wheel with foot
guard: four pcs, one in
each corner
Table 2.1 Identification of the external parts in Figure 2.1