MIR 250 Hook - Unpacking Mir250 Hook

6. Getting started
MiR250 Hook User Guide (en) 01/2023 - v.1.2 ©Copyright 2021-2023: Mobile Industrial Robots A/S. 62
• The USB flash drive in the document folder has the following content:
• MiR250 Hook User Guide
• MiR250 Hook Quick Start
• MiR Network and WiFi Guide
• MiR Cybersecurity Guide
• MiR Robot Interface Guide
• Getting the robot online
• Declaration of Incorporation
6.2 Unpacking MiR250 Hook
This section describes how to unpack the robot.
Keep the original packaging for future transportation of MiR250 Hook.
We recommend that two people unpack the robot.
To unpack the robot, follow these steps:
1 Place the box with the robot so that there is at least three meters of free space at the
front or the back of the box. This is necessary as the robot drives out of the box on a
ramp.
2 Cut the protective straps surrounding the box.