12. Commissioning
MiR250 Hook User Guide (en) 01/2023 - v.1.2 ©Copyright 2021-2023: Mobile Industrial Robots A/S. 147
12.6 Creating and configuring maps
The map is visible in the robot interface and is the basis for the robot's ability to navigate its
surroundings safely and efficiently. The map illustrates the physical area in which the robot
operates.
Figure 12.4 Example of a map without any added zones, positions, or markers.
The robot must have a map for every area that it operates in. It is important to create robust and
reliable maps for the robot to perform effectively and safely.
To Next Page
Loading...
