MIR 250 Hook - Page 44

4. Safety
MiR250 Hook User Guide (en) 01/2023 - v.1.2 ©Copyright 2021-2023: Mobile Industrial Robots A/S. 44
WARNING
Load falling or robot overturning if the load on the robot is not positioned or
fastened correctly can cause fall injuries to nearby personnel or damage to
equipment.
• Ensure that the load is positioned according to the specifications and is fastened
correctly.
CAUTION
This equipment is not intended for use in residential environments and may not
provide adequate protection to radio reception in such environments.
• Do not use the robot in residential environments.
WARNING
Personnel standing next to the robot when it is picking up or placing a cart risk being
injured by an impact.
• Ensure that areas for picking up and placing carts are clearly marked as operating
hazard zones with visible tape or similar marking and that all personnel are
instructed not to stand in the hazard zone when the robot is operating in it.
WARNING
When the robot is turning while towing a cart, there is a risk of injury to personnel
close to the cart.
• Instruct personnel to maintain a safe distance from the robot when it is turning
while towing a cart.
WARNING
When the robot is driving while the hook brake is released without being connected
to a cart, the hook can rotate freely. Nearby personnel may be hit by the hook.
• Never release the hook brakes while the robot is driving without a cart.