330
Routers & Kaleido-X
Configuring a Multiviewer’s Internal Router
3Click OPTION A (or B) under Kaleido-X (7RU) (Internal Router) in the physical routers
list. Note that the physical levels are automatically created—OPTION A (Video 120
× 48)
and OPTION B (Video 120
× 48)—and configured to the right size.
Notes
• The following ports are always active and can be used for controlling a
Kaleido-X over TCP/IP, via the associated protocols:
• port 14000 (SW-P-08)
• port 2000 (SW-P-02)
• port 4381 (VikinX Modular)
• port 5194 (NVISION Ethernet protocol - Compact router)
• When controlling a multiviewer, by using one of the TCP/IP router
protocols, the router level to be controlled must be configured in XEdit
(see
step 6 under Creating a Single Multiviewer System, on page 77). No
other communication configuration is required in XEdit.
To Next Page
Loading...
