331
Kaleido-X
User’s Manual
4 Navigate to the KX Router folder, under Logical routers, and then click the [0] Video
level.
In a factory-default configuration, the physical levels OPTION A and OPTION B are
automatically included in the KX Router logical level [0] Video. If the physical levels
(OPTION A, or B) for your actual router cards are not included—for example, this would
be the case if you just added a router card to your system configuration—, then you
must add them to this logical level.
5In the Router configurations tab, click Add.
The Select Levels window appears, listing all available physical levels.
Note: “120 × 48” refers to the physical router size including internal
connections used for router expansion. The actual size of each router card is
96
× 24. Refer to Configuring Router Card Expansion in the Kaleido-X (7RU)
Hardware Description & Installation Manual, for more information.
IMPORTANT
Controlling the multiviewer’s internal router by using any other logical router
than KX
Router is not supported. The physical levels OPTION A and OPTION B
must be added to the first level (i.e. [0] Video), under KX
Router.
To Next Page
Loading...
