EasyManua.ls Logo

Mitel 430 - Page 216

Mitel 430
264 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation and Maintenance
216
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
CTI first party Connection lost The ATPC3 first-party link was interrupted
because the cycle signal is missing.
User number, date,
time
critical
(negative,
with
match)
CTI third party: Connection
established
The ATPC3 third-party link was (re)established Date, time
critical
(positive,
with
match)
CTI third party: Connection
lost
The ATPC3 third-party link was interrupted Cause (0: Logoff, 1:
missing cycle signal),
date, time
critical
(negative,
with
match)
Definitive activation licence
missing
The initial temporary activation of the communi-
cation server for a certain duration (e.g. 90 days)
was started. After this period, the communica-
tion server switches to restricted operating mode
(see "
Restricted operating mode", page 71).
Date, time
critical
(negative,
with
match)
Definitive activation licence
now present
A licence code with a definitive activation licence
was entered.
Date, time
critical
(positive,
with
match)
Dual Homing back within the
licence limit
There are now enough licences available for
registering SIP phones in the Mitel 6700 SIP /
6800 SIP series on a backup communication
server.
Note:
This event message is generated by the backup
communication server.
Date, time
Serious
(positive,
with
match)
E-mail successfully sent The system has now successfully sent an e-
mail.
Meaning of the parameter values in Tab. 104
Cause/action=0000,
e-mail client, addi-
tional information,
date, time
critical
(positive,
with
match)
ESME reachable The LAN connection between the SMSC and the
ESME is now available
IP address, date,
time
critical
(positive,
with
match)
ESME unreachable The LAN connection between the SMSC and the
ESME is interrupted
IP address, date,
time
critical
(negative,
with
match)
Ethernet activated again The overload on the Ethernet interface no longer
exists. The interface has been reactivated.
Date, time
Normal
(positive,
with
match)
Ethernet deactivated due to
high load
The system has detected an overload on the
Ethernet interface. The interface is temporarily
deactivated.
Date, time
Normal
(negative,
with
match)
Event message Trigger condition Details
1)
Severity

Table of Contents

Other manuals for Mitel 430

Related product manuals