Mitel 430 - Page 226

Operation and Maintenance
226
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
Terminal power
supply: Within normal range
again (Mitel 470 only)
The power supply to the terminals is back in the
normal rated output range following a slight,
preceding overflow.
Date, time
critical
(positive,
with
match)
Test event message The configuration of message destinations can
be tested with this event message.
Date, time
Serious
(without
match)
The communication server
has been restarted
The communication server was restarted manu-
ally or automatically due to an error.
Date, time
Critical
(without
match)
The licence limit for BluStar
clients has been reached.
A BluStar client was unable to register because
there are too few licences for this client type.
Parameter 1: 0 (not used)
Licence type: 0 and 1: (not used), 2: BluStar CTI,
3: BluStar Softphone, 4: BluStar video option,
5: BluStar Presence option
Parameter 1, licence
type, total purchased
licences, date, time
Serious
(negative,
with
match)
The licence limit for CSTA
sessions has been reached
An application is unable to set up a CSTA ses-
sion to monitor/check a terminal because there
are too few CSTA Sessions licences available.
Max. number of
licences, date, time
Serious
(negative,
with
match)
The licence limit for Dual
Homing has been reached
A SIP phone in the Mitel 6700 SIP / 6800 SIP
series has attempted to register on a backup
communication server and not enough licences
are available.
Note:
This event message is generated by the backup
communication server.
Date, time
Serious
(negative,
with
match)
The licence limit for G.729
codecs has been reached.
An attempt was made to set up a G.729 connec-
tion, but there are no free G.729 codecs availa-
ble at present.
Max. number of
licences, date, time
Serious
(negative,
with
match)
The licence limit for Mitel
Dialer has been reached
Mitel Dialer could not be linked to a user
because too few licences are available.
Total purchased
licences, date, time
Normal
(negative,
with
match)
The licence limit for Mitel SIP
terminals has been reached
A Mitel SIP terminal is unable to register or use
the video functionality because there are too few
Mitel SIP Terminals or Mitel 8000i Video Options
licences available.
Parameter 1=1:
Missing Mitel SIP
Term ina ls licence,
Parameter 2=1:
Missing Mitel 8000i
Video Options
licence, Parameter
3=3: Max. number of
licences, date, time
Serious
(negative,
with
match)
The licence limit for SIM-
PLE/MSRP has been
reached
A third-party application wishes to use the
MSRP and/or SIMPLE protocol for a user, but
not enough licences are available.
Date, time
Serious
(negative,
with
match)
Event message Trigger condition Details
1)
Severity