Mitel 430 - Page 227

Operation and Maintenance
227
Mitel 415/430 as of R4.1
syd-0580/1.2 – R4.1 – 08.2016
The licence limit for standard
SIP terminals has been
reached
A standard SIP terminal is unable to register or
use the video functionality because there are too
few SIP Terminals or Video Terminals licences
available.
Parameter 1=1:
Missing SIP Termi-
nals licence, Param-
eter 2=1: Missing
Video Terminals
licence, Parameter
3=3: Max. number of
licences, date, time
Serious
(negative,
with
match)
The licensing limit for the
maximum number of users
has been reached
If in WebAdmin the 37. user is opened and no
Mitel 470 Expansion licence is in place.
Date, time
Serious
(negative,
with
match)
The maximum number of
users is within the licence
limit again
A Mitel 470 Expansion licence is now available
or the number of users has been reduced to 36.
Date, time
Serious
(positive,
with
match)
TLS certificate expires soon A TLS certificate for a SIP node or SIP endpoint
is about to expire (Serious severity level) or has
just expired (Critical severity level) and needs to
be renewed.
If the endpoint type is = 0 (Mitel), then is param-
eter 2 = node ID.
If the endpoint type is = 1 (3rd party), then the
remaining parameter data contains the first
eleven characters of the certificate name.
Type of endpoint
(0: Mitel, 1: 3rd
party), node ID or
certificate name,
date, time
Serious /
Critical
(without
match)
TLS certificate update failed The update of the TLS certificate for an SIP
node or SIP endpoint via FTP has failed and
needs to be renewed manually.
If the endpoint type is = 0 (Mitel), then is param-
eter 2 = node ID.
If the endpoint type is = 1 (3rd party), then the
remaining parameter data contains the first
eleven characters of the certificate name.
Type of endpoint
(0: Mitel, 1: 3rd
party), node ID or
certificate name,
date, time
critical
(negative,
with
match)
TLS certificate update suc-
cessful
A TLS certificate for a SIP node or SIP endpoint
was successfully renewed.
If the endpoint type is = 0 (Mitel), then is param-
eter 2 = node ID.
If the endpoint type is = 1 (3rd party), then the
remaining parameter data contains the first
eleven characters of the certificate name.
Type of endpoint
(0: Mitel, 1: 3rd
party), node ID or
certificate name,
date, time
critical
(positive,
with
match)
TLS certificate was
generated: Upgrade non-
Mitel endpoints now
A TLS certificate has been generated. If genera-
tion is manual, the certificate must be imported
manually into the Mitel SIP nodes. The certifi-
cate must always be imported manually on all
non-Mitel nodes and non-Mitel endpoints.
Date, time
Normal
(without
match)
Too few FoIP channels Setting up a fax connection via T.38 failed
because no FoIP channel is available.
Available FoIP chan-
nels on node
Normal
(without
match)
Event message Trigger condition Details
1)
Severity